A-ARM Stretch Wrappers
(Cousins Exclusive)
Super Rapid Thread Pre-Stretch CarriageAutomatic Stretch
Overhead Rotary
Arm Stretch Wrappers
Turntable Stretch
All Categories > Automatic Stretch Wrappers > Conveyorized Turntable Automatics > Model 3300-CTA Heavy Duty Conveyorized Automatic Stretch Wrap System  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model 3300-CTA Heavy Duty Conveyorized Automatic Stretch Wrap System

Specifications  · Features


Production Speed

  • 1-40 loads per hour
    NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
  • Load Capacity

  • Maximum load weight: 4,000 lbs dynamic - 12,000 lbs static
  • Maximum load size: 48" W x 48" L (68" max. load diagonal) x 75" H (plus up to 4" top overlap)
  • Minimum load size: 30" W x 30" L x 24" H
  • Turntable

  • 72" diameter 3/8" thick laser-cut steel plate with 5" skirt
  • Front and side cut-outs with UHMW flexible contouring for fork truck access
  • 6-point heavy duty ball bearing caster support system
  • ANSI # 60 direct chain drive c/w chain tensioner
  • 3-16 RPM rotational speed c/w soft start acceleration
  • 3/4 HP AC variable speed motor c/w turntable holding brake
  • Final revolution deceleration and positive stop alignment
  • Film Carriage Elevator

  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
  • Maintenance free carriage guidance system
  • Film Delivery System

  • NEW Super Rapid Thread II ™ 20" capacity pre-stretch film carriage
  • Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load
  • 1/2 HP AC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33% to 313% fixed stretch capability
  • Pre-stretch ratio variable using easy sprocket change
  • Carriage Descent Obstruction Safety Shut-Off Device
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Side mounted film carriage for operator convenience and safety
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers
  • Powered Roller Conveyor

    Basic system includes: 72" dia. powered Process/Turntable section & 5 ft. Gravity Outfeed section

    Turntable section includes:
  • Chain driven live roller type conveyor
  • Rated 4,000 lbs per section
  • 2-1/2" diameter 11 gauge rollers c/w 11/16" hex axles on 3" centers
  • ANSI # 40 roller to roller chain drive
  • 50" effective roller width
  • Conveyor speed variable up to 30 FPM with electronic soft start
  • Pass-line height - 16-1/2" from floor to top of rollers
  • 1/2 HP AC variable speed motor
  • Electrical Input Requirement

  • 115 Volts 1 Phase 60 Hz 20 Amps

  • Features

    Automation Features

    "All Electric - No Pneumatics Required"
  • Electro-mechanically actuated film clamp mechanism
  • Electro-mechanically actuated film tail cut/wipe arm mechanism
  • Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle
  • Control Features

  • PANASONIC PLC with Touchscreen Operator Interface
  • Power Off - On - Reset switch & Power On Indicator light
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Emergency Stop button
  • Turntable Jog button
  • Film Carriage Lower & Raise buttons
  • Film Clamp Open/Close button
  • Eject Load (Turntable Conveyor Jog) button
  • Film Tension (Force-to-Load) Control
  • Selectable Reduced Bottom Film Force parameter for wrapping bottom of load
  • Separate film carriage raise & lower speed controls
  • Variable turntable speed control
  • Triple beam auto load height sensing photo-eye, detects dark or shiny loads
  • Separate 1 to 12 revolution top & bottom wrap control
  • Gravity conveyor full photo-eye
  • Broken film/out of film detection c/w automatic machine reset
  • Beacon light indicates run, clear or fault conditions
  • Wireless remote start/stop control - optional lanyard, pendant or pedestal control station available
  • NEMA 12 control panel enclosure
  • Non-proprietary UL/CSA approved components
  • Structural Features

  • All structural steel construction
  • Forklift truck portable base structure design - lifting tubes included for front and rear access
  • Structural steel tube machine tower with sheet metal covers
  • Electro-static powder coated paint finish


    3300-CTA Flyer
    (PDF, 480KB)

    Dimensional Drawing for Model 3300-CTA Heavy Duty Conveyorized Automatic Stretch Wrap System
    (PDF, 104KB)

    Specifications for Model 3300-CTA Heavy Duty Conveyorized Automatic Stretch Wrap System
    (PDF, 111KB)