A-ARM Stretch Wrappers
(Cousins Exclusive)
Super Rapid Thread Pre-Stretch CarriageAutomatic Stretch
Overhead Rotary
Arm Stretch Wrappers
Turntable Stretch
All Categories > Semi-Automatic Turntable Stretch Wrappers > "The Switch" Model HP-SW Heavy Duty Turntable Semi-Automatic Stretch Wrap System (High Profile)  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

"The Switch" Model HP-SW Heavy Duty Turntable Semi-Automatic Stretch Wrap System (High Profile)

Specifications  · Features


Production Speed

  • 1-35 loads per hour (Single Turntable)
    NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
  • Capacity

  • Maximum load weight: 4,500 lbs dynamic - 10,000 lbs static
  • Maximum load size to safely clear the tower: 67" W x 67" L (96" load diagonal)
  • Maximum load size to remain inboard of the turntable: 48" W x 48" L (68" load diagonal)
  • Maximum load height: 80" H (plus up to 4" top overlap)
  • Turntable

  • 48" octagonal 5/16" thick formed steel plate turntable
  • 4 point caster support system
  • Turntable height less than 11" from floor
  • ANSI # 50 direct chain drive c/w chain tensioner
  • 3-12 RPM rotational speed c/w soft start acceleration
  • 1/2 HP AC variable speed motor
  • Final revolution deceleration and positive stop alignment
  • Front and back forklift ports for easy movement
  • Accu-Count exact turntable positioning system for additional film savings!
  • Film Carriage Elevator

  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
  • Maintenance free carriage guidance system
  • Film Delivery System

  • NEW Super Rapid Thread II ™ 20" capacity pre-stretch film carriage
  • Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP AC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33% to 313% fixed stretch capability
  • Pre-stretch ratio variable using easy sprocket change
  • Carriage Descent Obstruction Safety Shut-Off Device
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Side mounted film carriage for operator convenience and safety
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers
  • Electrical Input Requirements

  • 115 Volts 1 Phase 60 Hz 15 Amps

  • Features

    Control Features

  • Electronic controls with LCD operator interface
  • Power Off - On - Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Base or Top Wraps First program
  • Up Only or Up/Down wrap program
  • Emergency Stop button
  • Turntable Jog button
  • Film Carriage Lower & Raise buttons
  • Film Tension (Force-to-Load) control
  • Separate film carriage raise & lower speed controls
  • Operator programmable turntable speed control
  • Triple beam automatic load height detection sensor for dark or shiny loads
  • Separate 1 to 12 revolution top & bottom wrap control
  • Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
  • A - B - C wrap program selector with capability to input and store unique wrapping parameters for each program
  • Structural Features

  • All structural steel construction
  • Forklift truck portable base structure design - lifting tubes included for front and rear access
  • Structural steel tube machine tower with sheet metal covers
  • Electro-static powder coated paint finish


    The Switch Flyer
    (PDF, 1573KB)

    Dimensional Drawing for The Switch Model HP-SW Heavy Duty Turntable Semi-Automatic Stretch Wrap System (High Profile)
    (PDF, 47KB)

    Specifications for The Switch Model HP-SW Heavy Duty Turntable Semi-Automatic Stretch Wrap System (High Profile)
    (PDF, 108KB)