A-ARM Stretch Wrappers
(Cousins Exclusive)
Super Rapid Thread Pre-Stretch CarriageAutomatic Stretch
Wrappers
Semi-Automatic
Overhead Rotary
Arm Stretch Wrappers
Semi-Automatic
Turntable Stretch
Wrappers
All Categories > Semi-Automatic Turntable Stretch Wrappers > HP 2100-SRT Heavy Duty Tunrtable semi-Automatic Stretch Wrap System (High Profile)  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model HP 2100-SRT Heavy Duty Turntable Semi-Automatic Stretch Wrap System (High Profile)








Features  · Specifications

Features

Control Features

  • Electronic controls with LCD operator interface
  • Power Off - On - Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Base or Top Wraps First program
  • Up Only or Up/Down wrap program
  • Emergency Stop button
  • Turntable Jog button
  • Film Carriage Lower & Raise buttons
  • Film Tension (Force-to-Load) control
  • Separate film carriage raise & lower speed controls
  • Operator programmable turntable speed control
  • Triple beam automatic load height detection sensor for dark or shiny loads
  • Separate 1 to 12 revolution top & bottom wrap control
  • Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
  • A - B - C wrap program selector with capability to input and store unique wrapping parameters for each program
  • Turntable

  • 48" octagonal 5/16" thick formed steel plate turntable
  • 4 point caster support system
  • Turntable height less than 11" from floor
  • ANSI # 50 direct chain drive c/w chain tensioner
  • 3-12 RPM rotational speed c/w soft start acceleration
  • 1/2 HP AC variable speed motor
  • Final revolution deceleration and positive stop alignment
  • Front and back forklift ports for easy movement
  • Accu-Count exact turntable positioning system for additional film savings!
  • Structural Features

  • All structural steel construction
  • Forklift truck portable base structure design - lifting tubes included for front and rear access
  • Structural steel tube machine tower with sheet metal covers
  • Electro-static powder coated paint finish


  • Specifications

    Electrical Input Requirements

  • 115 Volts 1 Phase 60 Hz 15 Amps
  • Film Carriage Elevator

  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
  • Maintenance free carriage guidance system
  • Film Delivery System

  • NEW Super Rapid Thread II ™ 20" capacity pre-stretch film carriage
  • Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP AC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33% to 313% fixed stretch capability
  • Pre-stretch ratio variable using easy sprocket change
  • Carriage Descent Obstruction Safety Shut-Off Device
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Side mounted film carriage for operator convenience and safety
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers
  • Capacity

  • Maximum load size to safely clear the tower: 56" W x 56" L (79" load diagonal)
  • Maximum load size to remain inboard of the turntable: 48" W x 48" L (68" load diagonal)
  • Maximum load height: 75" H (plus up to 4" top overlap)
  • Production Speed

  • 1-35 loads per hour (Single Turntable)
    NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
  • Select Options

    OAFS - Auto Film Start (Includes film holding clip & pendant start/stop station)
    OBFD - Broken Film/Out of Film Detection c/w Automatic Machine Reset and Fault Indication

    OCP2 - Cold Weather Package (down to 32ºF)

    ODP1 - Dusty Package

    OEB1 - 2 ft. Base Extension for Maximum 95" Diagonal (Note: 71" diagonal is standard)

    OEWH-110-S - Tower Extension for 110" Wrap Height Capability (Note: Standard is 80". All machines with tower extensions will be hinged and shipped knocked-down)

    OPABL - Beacon Light with Red & Green lens - (Indicates run, clear or fault conditions)

    OPSCLP-SW250 - SCALE PACKAGE (PLATFORM) - SureWeigh Platform Scale with GSE250 Digital Weight Indicator (Notes: OSCRMPP Scale Ramp option is required for pallet jacks. Machine with base extension option requires a factory quote)

    ORMP-S - Ramp for manual pallet jack loading - 48" W x 60" L

    OPE1-S - 24" L x 48" W Porch Extension for Powered Pallet Jacks

    OPE2-S - 40" L x 48" W Porch Extension for Powered Pallet Jacks

    OSCBI-250 - LOW PROFILE SCALE PACKAGE - Built-in Load Cells with GSE250 Digital Weight Indicator (Notes: SCBIRMP Scale Ramp option is required for pallet jacks. Machine with base extension option requires a factory quote)

    OSCBIRMP - Heavy Duty Scale Ramp for use with built-in load cells

    OSCRMPP - Complete 120"L x 48"W Heavy Duty Scale Ramp & Porch for use with platform scales

    OSSPK - Starter Spare Parts Kit


     DOWNLOADS 

    Flyer HP 2100-SRT
    (PDF, 1093KB)

    Dimensional Drawing for Model HP 2100-SRT Heavy Duty Turntable Semi-Automatic Stretch Wrap System (High Profile)
    (PDF, 36KB)

    Specification for Model HP 2100-SRT Heavy Duty Turntable Semi-Automatic Stretch Wrap System (High Profile)
    (PDF, 27KB)